Electric Bratt Pan

Bratt Pan & Tilting Pan

Showing all 5 results

  • Electric Bratt Pan

    Model: E17/M60I8-N

    • Basin manufactured in stainless steel AISI 304,bottom in stainless steel AISI 316.
      – Diameter of the basin 420, depth 485 mm.
      – Outlet tap of 1″,1/2.
    • – Made of 18/10 AISI 304 stainless steel, deep-drawn “Top” thickness 15/10th, adjustable stainless steel feet (150/200 mm), waterproof “IPX5″.
      – Deep-drawn” tank made of AISI 316 stainless steel, bottom 30/10 mm thick, side walls 20/10 mm thick, resistant to salt corrosion and wear, equipped with a removable strainer to protect the drain valve. Water tap for filling the tank.
      – Deep-drawn” cover, made of AISI 316 stainless steel with double walls, “reinforced edge” hinges with “torsion spring” allowing gradual closing and opening.
      – Indirect heating, double jacketed tank, manual water filling. Two taps located on the front panel of the unit, the first for the opening, the second for the overflow. Pressure control of the double jacket by a 0.5 BAR valve, vacuum valve with a pressure gauge on the front panel.
      – Electric heating by immersion resistors in the double jacket, regulated by a 4-position switch.
      – Appliances built in compliance with current standards (CE)
  • Electric Tilting Pan

    Model: E17/BRI8-230/3–N


  • Electric Tilting Pan – Table top

    Model: E65/BRI7T



    • Basis 490x440xh140 mm, surface 21,56 dm2.
    • Manufactured in stainless steel 18/10 AISI 304.
    • Basin manufacturd in stainless steel aisi 304 of a very strong thickness and with a very high heath conduction.
    • Frontal manual tumbling system.
    • Electric heating, through 3 armoured resistances in stainless steel (uniform cooking throughout the entire cooking surface in the basin).
    • Temperature regulation through thermostat, from 50°C to 300°C.
  • Gas Bratt Pan

    Model: G17/M60I8-N


    mm (L x W x H): 800 x 700(730) x 850/920

    kW: 0.2

    Weight: 115 kg

    Voltage: 230/1N 50-60Hz

    Kcal: 12040

  • Gas Tilting Pan

    Model: G7/BRI8



    • Basin dimensions 710x480xh150 mm., surface 34 dm2.
    • Tumbling of the basin through a manual lever.
    • Made of stainless steel AISI 304, adjustable stainless steel feet.
    • Top (15/10 mm) in stainless steel AISI 304.
    • Rear chimney in stainless steel AISI 304.
    • Hinged upper lid of the bowl with “torsion spring” in stainless steel, allowing a gradual closing and opening, provided with an ergonomic front handle made in stainless steel.
    • Tilting bowl made of AISI 304 stainless steel thickness (13 mm) with high thermal conductivity, rounded inner corners for easy and hygienic maintenance. A water tap for filling is fixed on the upper top, with the control positioned on the front.
    • Gas heating, by stainless steel burners with stabilized flame, regulation by thermostatic valve 90 to 300°C (uniform temperature on the whole bottom of the tank), ignition by pilot light and safety system by thermocouple, piezoelectric device, front access for easy maintenance.