Bone Saw Machine

Preparation Equipment

Showing all 16 results

  • Bone Saw Machine

    Model: SA-183/2

    PRODUCT DETAILS

    • Ribbon saw in stainless steel of 1830 mm.
    • Max. Cutting height : 210mm
    • Engine 1hp, tensionregulator of the ribbon.
    • Frame made of anodised aluminium.
    • Security microswitch, engine brake, low tension operators.
    • Equipped with a pusher,calibration plate in stainless steel AISI 304.
  • Bone Saw Machine

    Model: SAX-165/9

    PRODUCT DETAILS

    • Blade length 1650 mm.
    • Height cap. 250 mm.
    • AISI 304 stainless steel waterproof construction.
    • Equipped with meat pusher and portion device.
    • Interlocked waste tray is removable from outside.
    • Removable door and upper pulley for easier cleaning.
    • Aluminum pulleys with sealed ball bearings.
    • Single-phase motors comes with standard thermal protection.
    • Easy unlocking of the upper pulley allows for easier cleaning and blade replacement.
    • Removable PVC scrapers.
    • IP 54 24 V on/off switch with safety microswitch.
    • The machine is produced in accordance with CE norms.
  • Bone Saw Machine

    Model: SAX-310/7

    PRODUCT DETAILS

    • Blade length 3000 mm.
    • Height cap. 250 mm.
    • AISI 304 stainless steel waterproof construction.
    • Equipped with meat pusher and portion device.
    • Interlocked waste tray is removable from outside.
    • Removable door and upper pulley for easier cleaning.
    • Aluminum pulleys with sealed ball bearings.
    • Single-phase motors comes with standard thermal protection.
    • Easy unlocking of the upper pulley allows for easier cleaning and blade replacement.
    • Removable PVC scrapers.
    • IP 54 24 V on/off switch with safety microswitch.
    • The machine is produced in accordance with CE norms.
  • Dough Sheeters

    Model: LB50-TT/SS

    PRODUCT DETAILS

    • Mechanical controls, joystick.
    • Table version (very compact), 4 adjustable cylinders
    • Manual controls.
    • 1 speed.
    • Side shelves of 500×500 mm.
    • Cylinder length 500 mm
    • Roll opening 0 – 36 mm, rolling diameter 60 mm
    • Travel speed 35 metres/minute.
    • Side shelves made of food-processed steel and allowing the product to slide.
    • Precise regulation of the thickness of the dough sheet, constant production.
    • Scrapers and supports made with specific materials (POM-C) for food use.
    • Easy disassembly and reassembly of scrapers, without tools.
    • Chrome-plated and ground steel cylinders.
    • Harvesting bin under the cylinders.
    • Frame in painted steel (epoxy).
    • Low voltage controls 24V
    • Emergency stop button type “punch”.
    • Roller protection grids, made of stainless steel.
    • Traction system, self-lubricated.
    • Top flour bin.
    • The device is built in compliance with the current CE standards.

  • Hand Mixer / Stick Blender

    Model: MIV-30

    PRODUCT DETAILS

    • Diving mixer 30 liters
    • Pipe 300 mm
    • Speed dimmer

  • Kneading Machines

    Model: PBP-25/MVV

    PRODUCT DETAILS

    • Variable speed (from 35 to 60 movements per minute)
    • Production capacity 5 to 23 kg (40 Lt)
    • Flour capacity 3 to 15 kg
    • Timer supplied as standard
    • Tank Ø 425xh295 mm
    • Analog control panel with low voltage 24 V (IP55).
    • Traction by gears made of nylon (high hardness), very quiet operation.
    • All moving parts are mounted on spherical bearings
    • Emergency stop button type “punch”.
    • Frame in epoxy painted steel, very thick.
    • Tank, plunging arms in thick AISI 304 stainless steel.
    • Protective plexiglass, with safety device by microswitch.
    • Comes standard with 2 fixed rear nylon wheels and 1 swivel wheel and 2 adjustable cylinders at the front.
    • The device is built in compliance with the current CE standards.

  • Meat Slicer

    Model: 350/MKD-C

    PRODUCT DETAILS

    • Large flow rate, for large distribution.
    • German oblique blade “Grund & Bunse”, inclination at 35°.
    • Precise opening movement of the blade over the first 3 mm.
    • Max. cutting capacity: 307xh220 mm (Ø 250 mm), thickness 0-24 mm.
    • 49 mm space between blade and frame.
    • Compact, robust, elegant and efficient, made of cast anodized and polished aluminium alloy.
    • Hardened, chrome-plated and ground steel blade, fixed protection ring and blade cover with microswitch (100% secure).
    • Reinforced stop, protection of the stop slide, removable.
    • Case with standard handling kit (blade extractor included).
    • Trolley with stainless steel ball bearings, easy and silent sliding, chrome-plated, ground and polished sliding bar, vulcanized rubber bumpers, Plexiglas protection as standard.
    • Heel pushers for all products (even the smallest).
    • All handles and lower cylinders made of solid aluminium!
    • Screws (not visible) and deflector in stainless steel.
    • Blade pulley without central hole (without tie rod), perfectly hermetic.
    • Ventilated motor, lower electrical parts with protective cap, sealing ring on transmission pulley.
    • Low-voltage controls 24 V, protection class IP 67, NVR (No-Voltage Release) protection rating to prevent unintentional starting, stainless steel keys, waterproof.
    • Integrated aluminium sharpener with 2 emery wheels and lower protection bowl.
    • The device is built in compliance with the current CE standards.
  • Meat Slicer

    Model: 350/BSS-N

    PRODUCT DETAILS

    • Vertical, straight-blade slicer.
    • Double-feed carriage with a clamping arm holding firmly in place all types of hams and cold meats.
    • Max. cutting capacity: 270xh250 (Ø 250 mm), slice thickness: 0-30 mm.
    • 50 mm gap between blade and body.
    • Sturdy, stylish and performing, sanitary polished and anodized aluminium alloy, hardened, chromed stainless blade, permanent tapered blade ring guard and interlocked blade guard (100% safe).
    • Reinforced gauge plate, removable slider guard.
    • A maintenance Kit comes standard (incl. blade extractor).
    • Carriage sliding on stainless bearings for an easy and quiet operation, polished, chromed and hardened sliding bar, vulcanized rubber carriage buffers, a plexiglass hand guard comes standard.
    • End weight conceived for all shapes, even the smallest.
    • All handles, knobs and feet made of full aluminium.
    • Stainless steel screws (not visible) and deflector.
    • Fan-cooled motor.
    • Bottom enclosure panel .
    • Transmission pulley protected with a retaining ring.
    • Low-voltage controls 24 V, protection class IP 67, waterproof stainless steel ON/OFF buttons. NVR (No-Voltage Release) to prevent accidental restart after power failure.
    • Dual-action built-in sharpener with protection bottom enclosure.
    • Adjustable feet.
    • Machine complying with the current CE standards.
  • Meat Slicer / Cutter

    Model: 350/VCS-N

    PRODUCT DETAILS

    • Vertical, straight-blade slicer.
    • Double-feed carriage for slicing large joints of raw meat.
    • Max. cutting capacity: 250xh245 (Ø 245 mm), slice thickness: 0-30 mm.
    • 50 mm gap between blade and motor.
    • Sturdy, stylish and performing, sanitary polished and anodized aluminium alloy, hardened, chromed stainless blade, permanent tapered blade ring guard and interlocked blade guard (100% safe).
    • Reinforced gauge plate, removable slider guard.
    • A maintenance Kit comes standard (incl. blade extractor).
    • Carriage sliding on stainless bearings for an easy and quiet operation, polished, chromed and hardened sliding bar, vulcanized rubber carriage buffers, a plexiglass hand guard comes standard.
    • End weight conceived for all shapes, even the smallest.
    • All handles, knobs and feet made of full aluminium.
    • Stainless steel screws (not visible) and deflector.
    • Fan-cooled motor.
    • Bottom enclosure panel .
    • Transmission pulley protected with a retaining ring.
    • Low-voltage controls 24 V, protection class IP 67, waterproof stainless steel ON/OFF buttons. NVR (No-Voltage Release) to prevent accidental restart after power failure.
    • Dual-action built-in sharpener with protection bottom enclosure.
    • Adjustable feet.
    • Machine complying with the current CE standards.
  • Meat Slicer / Cutter

    Model: 300/TLV

    PRODUCT DETAILS

    • Version with vertical blade.
    • Double-feed carriage with a clamping arm holding firmly in place all cold meats.
    • Cutting capacity 275 mm, plate 275xh260 mm.
    • Cutting thickness 0-30 mm.
    • Rounded design, no corners and sharp edges and no visible screws.
    • Blade (Ø 300 mm) made of hardened steel, chrome and improved, tapered blade ring guard and interlocked blade guard (100% safe).
    • Ashes of the cutting carriage in chrome, improved and polished.
    • Carriage sliding on stainless bearings for an easy and quiet operation, polished, chromed and hardened sliding bar, vulcanized rubber carriage buffers.
    • Removable slider guard.
    • Support disc in stainless steel, with interlocking closure.
    • Dual-action built-in sharpener with protection bottom enclosure.
    • Controls low voltage 24V, protection IP 54.
    • Fan-cooled motor, lower protection, with direct acces to electrical components, transmission pulley protected with a retaining ring.
    • Made of fusion of anodized and polished aluminum alloy, screws in stainless steel.
    • Adjustable feet.
    • Device built in compliance with the current (CE) standards.
  • Meat Slicer / Cutter

    Model: 350/GXS

    PRODUCT DETAILS

    • Self-lubricating, endless screw in oil-bath gear drive.
    • Gravity-feed 35° inclination (a blade extractor comes standard).
    • Max. cutting capacity 270xh230 (Ø 255 mm), slice thickness 0-30 mm.
    • 50 mm gap between blade and body.
    • Elegant and efficient, made of anodized and polished aluminium alloy melting.
    • Hardened, chrome-plated and rectified steel blade, fixed protection ring and blade cover with microswitch (100% safe).
    • Reinforced stop, protection of the stop slide, removable.
    • Carriage on stainless steel ball bearings, easy and silent sliding, chrome-plated, rectified and polished sliding bar, vulcanized rubber bumper, Plexiglas protection as standard.
    • Heel pushers for all products (even the smallest).
    • Stainless steel screws (not visible) and deflector.
    • Ventilated motor, lower electrical parts with protective cover, sealing ring on the transmission pulley.
      Low-voltage 24 V controls, IP 54 protection class, waterproof keys, NVR (No-Voltage Release) to prevent unintentional starting.
    • Built-in aluminium sharpener with 2 grinders and lower protection bowl.
    • Adjustable cylinders.
    • Unit built in compliance with current (CE) standards.
  • Meat Slicer / Cutter

    Model: 350/AVV

    PRODUCT DETAILS

    • For each and every product such as ham, sausage, raw meat, cheese.
    • Automatic carriage motion with variable speed control (it can be used manually as well).
    • Independent controls for carriage motion and blade.
    • Exclusive designed carriage with a special end weight and an adjustable vertical product fence to provide stability and advance products evenly.
    • Stainless steel base.
    • Oblique blade, 35° inclination (a blade extractor comes standard).
    • Max. cutting capacity: 270xh230 (Ø 255 mm), slice thickness: 0-30 mm.
    • 50 mm gap between blade and body.
    • Stylish and performing, sanitary polished and anodized aluminium alloy, hardened, chromed stainless blade, permanent tapered blade ring guard and interlocked blade guard (100% safe).
    • Reinforced gauge plate, removable slider guard.
    • Carriage sliding on stainless bearings for an easy and quiet operation, polished, chromed and hardened sliding bar, vulcanized rubber carriage buffers, a plexiglass hand guard comes standard.
    • End weight conceived for all shapes, even the smallest.
    • Stainless steel screws (not visible) and deflector.
    • Fan-cooled motor.
    • Bottom enclosure panel.
    • Transmission pulley protected with a retaining ring.
    • Low-voltage controls 24 V, protection class IP 54, waterproof ON/OFF buttons. NVR (No-Voltage Release) to prevent accidental restart after power failure.
    • Dual-action built-in sharpener with protection bottom enclosure.
    • Adjustable feet.
    • Machine complying with the current CE standards.
  • Meat Slicer / Cutter

    Model: RET-300

    PRODUCT DETAILS

    • Professional slicer “RETRO”, blade Ø 300 mm
    • mm (L x W x H) 550 x 800 x 500
    • Voltage: 230/1N 50-60Hz

     

     

  • Planetary Mixer

    Model: BTM-7S/N

    PRODUCT DETAILS

    • 7 liters Planetary mixer
    • On/Off switch, with variable speed.
    • Planetary mixer, metal construction.
    • Tilt-head allows for an easy receiving container removal, with microswitch, easy attachment replacement and easy cleaning.
    • Removable stainless steel receiving container.
    • 3 metal attachments come standard (whip, hook and palette).
    • self-lubricating gear transmission.
    • 24V, NVR (No-Voltage Release) to prevent accidental restart after power failure.
    • Machine complying with the current CE standards.

  • Spiral Mixers

    Model: PSB-82MI/2V

    PRODUCT DETAILS

    • Production capacity 80 kg (130 Lt)
    • Flour capacity 53 kg
    • 2 speeds, automatically adjustable (Spiral: 1st Speed 112 rpm and 2nd Speed 230 rpm) & (Tank: 16 rpm)
    • 2 electronic timers, for the automatic management of each speed.
    • 2 independent motors, one for the tank and one for the spiral
    • Device for pulse rotation of the tank and reversal of the direction of rotation of the tank.
    • Tank Ø 700xh370 mm
    • Control panel, low voltage 24 V. (IP55).
    • Motors with pulley transmissions.
    • Emergency stop button type “punch”.
    • Frame in epoxy painted steel, very thick.
    • Tank, spiral, tool shaft and dividing share are made of thick AISI 304 stainless steel.
    • Stainless steel spiral connection unit, waterproof and very solid.
    • Stainless steel tank protection grid with microswitch device.
    • Comes standard with 2 fixed rear nylon wheels and 1 swivel wheel and 2 adjustable cylinders at the front.
    • The device is built in compliance with the current CE standards.

  • Whisk Mixers

    Model: HBM-12B/VV

    PRODUCT DETAILS

    • Mixer-blender, table model
    • 10 liters
    • Variable speed
    • Variable speed (Min. 53 rpm & Max. 517 rpm), with Inverter.
    • Timer from 0 to 30 minutes or continuous
    • Standard accessories: whisk, spatula, hook and 10 L stainless steel tank.
    • Table versions.
    • Frame in painted steel (epoxy), upper cover in ABS, 4 lower cylinders for levelling.
    • Fixed tank, automatic locking in working position.
    • Protective plexiglass with safety device by microswitch.
    • All parts in contact with the tank are made of stainless steel.
    • Easy insertion and removal of utensils.
    • When the machine stops, the rotation of the tool is slowed down.
    • Emergency stop button type “punch”.
    • Powerful motor, pulley transmission.
    • Stainless steel utensil connection unit, waterproof, very solid.
    • Inking utensils with security.
    • Traction systems made of stainless steel, very quiet (self-lubricating).
    • The device is built in compliance with the current CE standards.